  
 We are continuing on the 20 foot Whaler project. This will be the electronics box housing for the Generation 2 Lowrance HDS 10 unit.  This is the look from inside the console. The wiring needs replacement. Not marine wire, not tinned and insulation cracking.
 We got the console up on the fork lift so I could stand up and work underneath and figure out the wiring. Lots to correct but it will be real nice when finished.
 I sanded and filled most of the imperfections in the plywood electronics box. Gave it two coats of Imron paint and will sand tomorrow and give it one more coat.
 We have the main hatch down over the gas tank that we replaced. It is starting to look like a boat again.
|
Restoration Check ListNew Fuel Tank
New Wiring Move Console Forward New Lowrance Electronics New Yamaha 200hp F200xb New Leaning Post New Rear Seating Archives
August 2013
Categories |
RSS Feed